메뉴 바로가기 본문 바로가기

Product List

SH-FU-11MS(1700℃)

1700°C / 1800°C Muffle Furnace

SH-FU-11MS(1700℃)

1700℃ high temp muffle furnace (4.5L)

  • High-Temperature Furnaces with MoSi2 Rod Heating up to 1700°C
  • Great for testing metallic sample and sintering
  • Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
  • Recommended ideal running temperature is below 1550℃ *24hours continuous running
  • Heating from 2 sides and vertical SiC rod preventing warping. Easy replacement
  • Excellent outgassing thanks to the exhaust air outlet on the head of chamber, i.e plastic polymer
  • Double housing and low surface temperature
  • Ceramic fiber materials which are not classified as carcinogenic
  • Great temp uniformity (+/-4%)
  • Prompt heat up and good maintaining
  • SCR operation and programmable control provides low noise operation and precise temp control (+/-1℃)
  • Gas atmosphere available with optional flow meter
  • Specification

  • Inquiry

  • Here is the proud supply reference of SH Scientific Muffle Furnace, Tube Furnace and Vacuum Furnace from customers and industries in US and Canada.

    • Destructive testing laboratories who carry heat treatment of ceramic, alloy, titanium and etc for aerospace and metallic production industries.
    • Building companies who transform metallic powder such as nickel alloy into sintered materials by sintering.
    • Material technology providers who develop polymer composites and advanced materials.
    • Aerospace companies who perform cyclic oxidation testing at high temperature in atmosphere-controlled environment.
    • Medical and healthcare companies who need analysis of ashes and contents through combustion of materials.
    • Material innovation companies who do sintering in vacuum for research purposes.
    • Subsea and surface injection system companies who need vacuum furnace for softening cycles, annealing and age hardening of Inconel 718 tubes.
    • Analytical research labs who perform various material testing with thermal treatment.
    • Medical implants manufacturers who anneal alloy powders.
    • Material scientists in universities who do sintering materials such as bio-derived ceramic parts.
    • Applied science engineers who process solid oxide fuel cells (SOFC).
    • Environmental and chemical researchers who need combustion of materials.
    • Regulatory compliance service providers in the areas of hazardous waste thermal treatment, air permitting, air pollution control, contaminated soil remediation, and hazardous waste management.
    • Metallic parts manufacturers who need vacuum brazing and heat treating for steel.
    • Water treatment companies who test glass content in FRP (fiber reinforced polymer) products according to ASTM D2584.
    • Semiconductor manufacturers who anneal Gallium nitride (GaN) semiconductor wafer.
    • Engineering companies who do curing and sintering solutions in porous tubes.
    • Civil engineers who need soil combustion.
    • University labs who anneal Si wafer in vacuum condition.
    • Chemistry research departments who do thermal treatments (stabilization in air and carbonization in argon) of carbon nanofiber precursors.
    • Marine equipment manufacturers who analyze ash content in marine HFO (Heavy Fuel Oil).
    • Graphene solution companies who produce graphene-based materials by CVD (Chemical Vapor Deposition) method. CVD furnace.
    • Solid state battery manufacturer with polymer electrolyte, oxide electrolyte, sulfide electrolyte, phosphate electrolyte and etc.

    SH Scientific is 40 years old laboratory equipment manufacturer and we supply vacuum ovens, cold trap baths, vacuum pumps, industrial drying ovens, forced convection drying ovens, CBD isolate vacuum chambers, terpene traps, stirring mantles, recirculating chillers and heaters, incubators, climate chambers, bio safety cabinets, fume hoods, autoclaves, water baths, oil baths, ultrasonic cleaners, rotary evaporators, glass reactors, clean bench and so on. And we do OEM and custom products as well.


     

  • Model SH-FU-11MS(17)
    Max temperature 1700℃
    Continuous running temperature 1550℃
    Chamber volume 11liters
    Controller Programmable controller
    Sensor R type
    Heater 5.2kW
    Heating element MoSi2
    Insulation Ceramic
    Power supply 220V, 50/60Hz, 1p, 23.6A
    Net weight 186kg
    Chamber size 200x270x200mm
    External size 1000x670x840mm
  • SH Scientific is an Advanced Laboratory Equipment Manufacturer

    If you have any questionsAsk me anything.

    Inquiry

    More