메뉴 바로가기 본문 바로가기

Product List

100TH – 1500°C – SH Tube Furnace

Max Temp 1500℃ tube furnace

SH-FU-100TH

Also available in 50mm tube size, 80mm tube size and 120mm tube size.

  • High temperature tube furnace with hinged door
  • 100mm (4″) diameter, 300mm (12″) hot zone
  • Max temperature 1500°C. Recommended ideal running temperature is 1350°C or below.
  • Double housing and low surface temperature (29~30°C at 800°C)
  • Great durability thanks to SiC heating element
  • Suitable for gas exchange experiment (WG SERIES)
  • Light weight and prompt heat up thanks to ceramic insulation
  • Convenient design for sample loading
  • Built in programmable controller. 5 patterns and 9 segment/pattern. Total 45 segments
  • Built in over temp protector
  • SCR operation and built in programmable controller provides low noise operation and precise temp control (+/-1°C)
  • Wide choice of applicable tube sizes and heating length. 50/80/100/120mm diameter and 300/600mm heating zone
  • Wide choice of tube materials. Quartz, ceramic, alumina and alloy

 

  • Specification

  • Documents

  • Inquiry

  • Description

    You are in the best place if you look for professional tube furnace selection with wanted configuration at the most reasonable prices.

    – tube furnace only
    – tube furnace with gas flow management system
    – tube furnace with gas flow management system bundled with vacuum pump and chiller (in short, vacuum tube furnace turnkey system)

    Furnace is our specialty and you can rely on us.
    Tube furnaces consist of cylindrical chambers surrounded by heating elements, which enable rapid heat up, recovery and cool down. Tube furnace is the most economical way to treat a small sample, especially where volatile materials need to be captured or atmosphere other than air is required. SH Scientific tube furnaces are designed for a range of applications with features that can include: digital programmable controller(s), single hot zone or three hot zones, double-shell construction, variable density insulation and split-hinge or solid door designs to allow horizontal usage. Programmable controller enables you to perform cyclic oxidation and treatment test at ease.

    These days the use of tube furnaces are more rapidly growing in the secondary battery and graphene battery, polymer composite, treatment of titanium and ceramic in 3D printing industry.

    SH Scientific tube furnace TH series goes up to max 1500°C and the ideal operating temperature is 1350°C. 50mm/80mm/100mm/120mm tube diameters are standard and we can custom larger diameter tubes too.

    TH series hot zone is 300mm and has a built-in 45 steps programmable controller.

    SH Scientific specializes in supplying gas flow management system consisting of ball type gas flow meter (or digital mass flow controller with back pressure regulator), seamless stainless steel 316 flow line, valve and connector, gas tight sealing mask and quartz, ceramic or alumina tube. Additionally, our vacuum tube furnace turnkey system consist of recirculating chiller and LOW NOISE vacuum pump for your perfect setup.
  • Model SH-FU-100TH
    Max temperature 1500°C
    Continuous running temperature 1350°C
    Tube diameter 100mm
    Controller Programmable controller
    Sensor R type
    Heater 6.4kW
     Hot zone 300mm
    Heating element SiC
    Insulation Ceramic
     External size  690x550x640mm
     Weight  114kg
    Power supply 220V, 50/60Hz, 1p, 28A
  • SH Scientific is an Advanced Laboratory Equipment Manufacturer

    If you have any questionsAsk me anything.

    Inquiry

    More